Neil's '74 Eldorado

Neil's '74 Eldorado

Neil's '74 Eldorado

« 1 2 3 4 5 6 7 8 9 10 11 12 13 14 »

Lower bearing at least had some grease on it.

Lower bearing at least had some grease on it.

Lower bearing and triple tree cleaned

Lower bearing and triple tree cleaned

Top bearing soaking in the nastiest cleaner I have. Finally got it cleaned.

Top bearing soaking in the nastiest cleaner I have. Finally got it cleaned.

Bearings packed with fresh grease, all the hardware cleaned, triple tree reinstalled.

Bearings packed with fresh grease, all the hardware cleaned, triple tree reinstalled.

Forks and headlight back on.

Forks and headlight back on.

Fender, wheel and brakes. Done the front end!

Fender, wheel and brakes. Done the front end!

Working on the dash assembly. Two of the warning light sockets were cracked, one had a hose clamp around it.

Working on the dash assembly. Two of the warning light sockets were cracked, one had a hose clamp around it.

Replaced them with good used ones, replaced a few burned out bulbs and then reinstalled the instrument cluster

Replaced them with good used ones, replaced a few burned out bulbs and then reinstalled the instrument cluster

Battery cables installed

Battery cables installed

Fabricated a battery holddown

Fabricated a battery holddown

Need to shorten the bolts a bit...

Need to shorten the bolts a bit...

Added a little foam rubber under the holddown and a rubber mat under the battery.

Added a little foam rubber under the holddown and a rubber mat under the battery.

« previous | next »

ditto

View Full-Size Image

ditto