V7 Sport Restoration

V7 Sport Restoration

V7 Sport Restoration

« 1 2 3 4 5 6 7 8 9 10 11 12 »

Test fitting the rear fender

Test fitting the rear fender

Fender straightened and polished

Fender straightened and polished

One signal done

One signal done

Went ahead and did the other three.

Went ahead and did the other three.

Taillight cleaned, polished and ready to install.

Taillight cleaned, polished and ready to install.

Polished up the horn's grilles. One is nice the other only okay.

Polished up the horn's grilles. One is nice the other only okay.

Painting the warning light housing...

Painting the warning light housing...

...the lower instrument housing and taillight bracket too.

...the lower instrument housing and taillight bracket too.

Cleaned and polished the speedo and tach.

Cleaned and polished the speedo and tach.

After a tough fight to get the headpipes loose from the crossover, I finally succeeded and polished the left one up. Doesn't polish up nearly as nice as I had hoped. Rather dull with lots of marks.

After a tough fight to get the headpipes loose from the crossover, I finally succeeded and polished the left one up. Doesn't polish up nearly as nice as I had hoped. Rather dull with lots of marks.

Mounted it up for a look.

Mounted it up for a look.

Right headpipe.

Right headpipe.

Just like the left. Rust at the crossover area that will be mostly hidden.

Just like the left. Rust at the crossover area that will be mostly hidden.

But these are out for all to see.

But these are out for all to see.

« previous | next »

Test fitting the rear fender

View Full-Size Image

Test fitting the rear fender