Eddy's Convert

Eddy's Convert

Eddy's Convert

« 1 2 3 4 5 6 7 8 9 10 11 12 13 »

Test fitting the mufflers. Zip ties hold it up so I can begin fabricating the mounting brackets.

Test fitting the mufflers. Zip ties hold it up so I can begin fabricating the mounting brackets.

Mounting bracket roughed out

Mounting bracket roughed out

Both done, primed and painted.

Both done, primed and painted.

Installed the battery and checked to make sure all the electrics work.

Installed the battery and checked to make sure all the electrics work.

Everything but the starter circuit checked out fine. The relay was clicking but the starter wouldn't run. The starter bench tested fine, eventually I found a faulty connector.

Everything but the starter circuit checked out fine. The relay was clicking but the starter wouldn't run. The starter bench tested fine, eventually I found a faulty connector.

Muffler brackets installed

Muffler brackets installed

Test fitting the seat

Test fitting the seat

A strip of felt applied to the taillight lens to prevent scuffing

A strip of felt applied to the taillight lens to prevent scuffing

Seat, tail piece, bag brackets, etc. fitted.

Seat, tail piece, bag brackets, etc. fitted.

Left sidecover off until ATF level is finalized.

Left sidecover off until ATF level is finalized.

Fully assembled, ready for first test ride

Fully assembled, ready for first test ride

Smurfs are tagging along

Smurfs are tagging along

« previous | next »

Everything but the starter circuit checked out fine. The relay was clicking but the starter wouldn't run. The starter bench tested fine, eventually I found a faulty connector.

View Full-Size Image

Everything but the starter circuit checked out fine. The relay was clicking but the starter wouldn't run. The starter bench tested fine, eventually I found a faulty connector.