Jack's Ambassador Restoration

Jack's Ambassador Restoration

Jack's Ambassador Restoration

« 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 »

The clutch throwout bearing bore in the rear cover of the transmission is abnormally worn.

The clutch throwout bearing bore in the rear cover of the transmission is abnormally worn.

I decided to source a replacement cover with a good bore instead of machining the other one.

I decided to source a replacement cover with a good bore instead of machining the other one.

Connecting rods back from the machine shop after having the small end bushings replaced.

Connecting rods back from the machine shop after having the small end bushings replaced.

Oil pickup and pipe installed.

Oil pickup and pipe installed.

Engine sump in place.

Engine sump in place.

Timing gears installed

Timing gears installed

Timing cover installed.

Timing cover installed.

Generator pulley hub installed.

Generator pulley hub installed.

Shiny shims and pulley half.

Shiny shims and pulley half.

Cam followers in place

Cam followers in place

Bellhousing studs installed

Bellhousing studs installed

All openings covered.

All openings covered.

Flywheel installed

Flywheel installed

Clutch springs siliconed to the pressure plate

Clutch springs siliconed to the pressure plate

« previous | next »

Connecting rods back from the machine shop after having the small end bushings replaced.

View Full-Size Image

Connecting rods back from the machine shop after having the small end bushings replaced.